What are jumpers on a Hard Drive?

We found this answers

I just bought 2 WD Caviar Black 1TB hdds. I remember reading somewhere that there are jumpers on 3Gb/s hdds which limits them to 1.5Gb/s. Do my drives have ... - Read more

Jumper Settings. WD SATA and EIDE Hard Drives umper settings determine the order in which EIDE hard drives and other devices attached to a single interface cable are ... - Read more

Discussion about this question


What are jumpers on a Hard Drive? resources

What Is the Purpose of Jumpers On an IDE Hard Drive? | eHow

IDE (Integrated Drive Electronics) hard drives have 6, 8 or 10 pins on the drive, which have may jumpers installed on them to determine how the drive will be accessed ...

How to Use Jumpers on a SATA Hard Drive | eHow

A SATA (Serial ATA) hard drive can be installed inside a computer to use for running an operating system or storing data. There are a number of pins on the back of a ...

How to Build Your Own PC - Setting Hard Drive Jumpers

Setting Hard Drive Jumpers. This is a good time to examine any instructions that came with your hard drive to see if any jumpers need to be adjusted.

Why does a SATA hard drive have jumpers? - Super User

Back in the days of PATA hard drives, a person used jumpers on the drive to indicate whether the drive was the master or the slave of the channel, or to let the cable ...

How to Use Jumpers on a SATA Hard Drive | Chron.com

How to Use Jumpers on a SATA Hard Drive by David Weedmark, Demand Media

2.5" and 3.5" jumper differences - Hard Drive - iFixit

Hard Drive. Repair information on hard drives or hard disks. Hard drives are magnetic data storage devices. They are used in most desktop, laptop, and server due to ...

SHOW MORE ....

What is the purpose of jumpers on an IDE hard drive ...

Jumpers on IDE (Integrated Drive Electronics) hard drives are so small they might seem insignificant. Their purpose, though, is very important to the ...

Jumper Settings Info Sheet - Western Digital

EIDE Hard Drive Jumper Settings WD EIDE hard drives are factory set with Cable Select (CSEL) jumper settings. The CSEL jumper setting protocol requires

How to use jumpers on a sata hard drive | eHow UK

A SATA hard drive can be installed inside a computer. hard drive interior image by Curtis Sorrentino from Fotolia.com. A SATA (Serial ATA) hard drive can be installed ...

Maxtor Jumper Settings - Tech-FAQ

Hard drive data recovery is the process of recovering lost data from a hard drive ...

jumpers on my hard drive - Windows XP - TechTalkz.com

I have a Maxtor hard drive Model #90650U2 or 9065OU2, so after the 9065 it's either a zero or a U. I was using it as a master and it had a jumper on the

western digital hard disk jumpers | unplugged

How to set jumpers on a Hard disk. Setting the Jumpers on a seagate hard drive. Cable Select. The drive is configured at the factory for a cable select ...

Re: jumpers on my hard drive - Tech-Archive.net

Relevant Pages. Re: jumpers on my hard drive... | prong or 2 prongs since there is also a slave drive?... (microsoft.public.windowsxp.basics) Re: jumpers on my hard drive

Why does a SATA hard drive have jumpers? - Earthwithsun.com

Welcome to Earthwithsun.com, where you can ask questions and receive answers from other members of the community.

Installing a Hard Drive - Computer Hardware Explained

Installing a Hard Drive. This tutorial on installing a hard drive, is one of the tutorials in the process of building your own computer. Hopefully you have installed ...

Installing a IDE/EIDE hard drive. - Computer Hope

Before installing the hard drive the jumpers must be properly set on the drive itself.

Computer Upgrade, A Hard Drive Upgrade Install Guide, Add ...

Not all hard drives have the same jumper options and labeling as the Deskstar 120GXP. For example, here is a Western Digital WD1200JB (120GB) hard drive.

What is a Hard Disk Drive? (Hard Drive, HDD, C Drive)

Most hard drives also have jumper settings on the back end that define how the motherboard is to recognize the drive when more than one is present.

How To Set The Jumper Setting On Your Hard Disk Drive

Use the common jumper settings for Samsung hard disk drives that are listed below. Please verify the jumper setting by checking the label on your hard disk drive.

Hard disk drive jumper settings - NetVista 2283, 6274, 6596

3.5-In IBM hard disk drive jumper settings The configuration of the following jumpers control the drive's mode of operation:MasterSlaveCSEL - Cable Select 3.5-In ...

How to Add an Extra Hard Drive: 19 Steps (with Pictures)

Set the jumpers so the drive knows whether to act as a master or slave (IDE only). The jumpers are the set of pins on the back of the hard drive.

How To Install A Second IDE Hard Drive On Older PC’s

The Drives & Jumper Settings. Whether it’s a CD-ROM drive or hard disk, ... as IDE cables are usually quite short. If the CD-ROM is far from the hard drives, ...

Basic jumper settings for Maxtor ATA Hard Drives

Basic jumper settings for Maxtor ATA Hard Drives Thank you for purchasing your new ATA hard drive from Other World Computing! Please review these jumper settings ...

How to Set the Jumper on a Maxtor Hard Drive | eHow UK

Remove the hard drive from your computer, being sure to disconnect both the power and data cables.

The BIOS does not detect or recognize the ATA / SATA hard ...

The BIOS does not detect or recognize the ATA / SATA hard drive ... Incorrect jumper settings on the drive. Faulty hard drive. Note: ...

How to Change a Computer Hard Drive Disk: 10 Steps

If your hard drive is still working, ... Once you have removed the original hard drive, look at the position of the jumpers on the drive itself.

How to set the jumper on a SCSI hard drive - Find Answers

The Enterprise drive is designed for use in a variety of systems. Therefore, several configuration options can be set using the option block on the front of the drive ...

Installing A Hard Drive - Step by Step | PCMech Report

Copy of the hard drive manual (if you need to set jumpers; this can be downloaded if your drive didn’t come with one) Controller card (optional; ...

Answers: hard drive - Changing SATA HDD speed with jumper

Back in the days of PATA hard drives, a person used jumpers on the drive to indicate whether the drive was the master or the slave of the channel, or to let the cable ...

Re: jumpers on my hard drive - Tech-Archive.net

Relevant Pages. Re: Buffer overrun and "Trend chipaway Virus (R) on guard"!?... If you have one drive on the cable, it goes on the end connector.... they mention ...

Jumper Definition - About.com PC Support

"The second hard drive I put it my computer didn't work but then I realized that I had set the jumper setting incorrectly."

How to: set your hard drive jumpers. - YouTube

Just a quick tutorial on how to set up your IDE's hard drive jumpers.